Stihl FS 56 C-E 27cc Handlebar Strimmer
Easy to start brushcutter for working on areas of tough grass. Multifunction controls, bike handle, STIHL 2-MIX engine, straight shaft, single strap harness, AutoCut mowing head.Comes standard with fully adjustable bike handle and AutoCut line head.
Standard features
-
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
-
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
-
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
-
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
-
Bike handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
-
Basic harness
For use with loop handle machines.
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
-
Technical data Value Displacement cm3 27.2 Performance kW 0.8 Power output hp 1.1 CO² g/kWh 853 Weight kg 1) 5.2 Sound pressure level with plastic tool dB(A) 2) 93 Sound power level dB(A) 2) 108 Vibration value, left with plastic tool m/s2 3) 4.7 Vibration value, right with plastic tool m/s2 3) 3.8 Total length cm 4) 170 Displacement cm³ 27.2 Power output kW/bhp 0.8/1.1 Cutting diameter mm 420 Weight kg 5) 5.2 Tank volume l 0.34 Standard cutting tool AutoCut C 26-2 Handle type Tool-free handle adjustment / mower handlebar Anti vibration system No AV-System Tank cap STV screw tank cap Starter cord ErgoStart 1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
5) without cutting tool and deflector
