Stihl TS 410 Cut-Off Compact Consaw - 67cc - max 12"/300mm

Standard:

STIHL ErgoStart (E)

A spring between the starter cord reel and crankshaft relieves the strain when starting, meaning that excessive pulling on the cord is no longer needed. The result is a convenient starting procedure with practically.

 

STIHL Quick Chain Tensioning (B)

With STIHL Quick Chain Tensioning, it's easy to adjust the saw chain, without tools and without coming into contact with the sharp saw chain itself. Just release the sprocket cover and turn the adjusting wheel to set the optimum tension.

 

Optional:

HD2 filter

This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with STIHL Varioclean and warm water.

 

Carburettor heating (V)

By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.

 

Pre-separation air filtration system

STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

 

Advanced combustion technology

Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.

 

Compensator

This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

 

Manual fuel pump (Purger)

STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

 

STIHL anti-vibration system

Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

 

STIHL Ematic System

Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

 

Single-lever master control

All important functions such as start, choke, throttle and stop are operated via a single lever.

 

Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Displacement cu-in	4.07
Displacement cm³	66.7
Power output PS	4.4
Power output kW	3.2
Vibration level, right m/s² 1)	3.9
Weight 2)	9,60
Weight kg 3)	9,5
Sound pressure level dB(A) 4)	98
Cutting wheel mm/in	300 / 12
Sound power level dB(A) 4)	109
Max. cutting depth mm	100
Vibration level, left m/s² 1)	3.9
Speed at maximum power Um	9000
Tank volume l	0.71
Fuel tank capacity oz	24
Weight	20,9

 

1. K-factor according to DIR 2006/42/EC = 2m / s ²
2. Complete, without tools
3. Weight excluding fuel and cutting wheel
4. K-factor according to DIR 2006/42/EC = 2.5 dB (A)